QSC Audio PLX3002 Professional Power Amplifier
Product code: SKU
Manufacturer: QSCPrice: $999.99 
| | 5% discount coupon:
Enter AFF01 at checkout
for 5% off any purchase |
|
QSC Audio PLX3002 Professional Power Amplifier A line of amplifiers that defines high impact. Up to 3,400 watts in a 2 rack-unit chassis that's only 13" deep and 21 lbs. We included our exclusive PowerWave Technology used in our award-winning PowerLight Series for chest-pounding bass and crystal-clear highs. It also features hum-free noise floor and ultra-low distortion of .03% THD. To keep PLX running under the most demanding conditions, we've even added our Advanced Thermal Management System. PLXs offer the reliability of a company that's been building professional amplifiers for over 30 years. Features: - Exclusive PowerWave power supply for superior bass and lighter weight
- Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
- LED indicators include bridge mono and parallel input modes
- Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack
- Class H output reduces AC power draw and heat by 40% (2402, 3002, & 3402)
- Selectable clip limiters and subsonic filters reduce distortion and protect speakers
- Variable-speed fan for low noise and solid 2 ohm performance
- Both 1/4" TRS & XLR inputs, Speakon(TM) and shock-proof binding post outputs
- 3-year warranty plus optional 3-year extension available
| PLX SPECIFICATIONS | PLX1202 | PLX1602 | PLX2402 | PLX3002 | PLX3402 |
|---|
| STEREO MODE, Both Channels Driven | | 8 ohms 20 Hz-20 kHz 0.03% THD | 200W | 300W | 425W | 550W | 700W | | 4 ohms 20 Hz-20 kHz 0.05% THD | 325W | 500W | 700W | 900W | 1100W | | 2 ohms 1 kHz 1% THD | 600W | 800W | 1200W | 1500W | 1700W | | BRIDGE MONO MODE | | 16 ohms 20 Hz-20 kHz 0.1% THD | 400W | 600W | 850W | 1100W | 1400W | | 8 ohms 20 Hz-20 kHz 0.1% THD | 700W | 1100W | 1500W | 2000W | 2200W | | 4 ohms 1 kHz 1% THD | 1200W | 1600W | 2400W | 3000W | 3400W | | Signal to Noise (20 Hz-20 kHz) | <-106 dB | <-107 dB | <-108 dB | <-107 dB | <-107 dB | | Input Sensitivity @ 8 ohms | 1.0Vrms | 1.2Vrms | 1.5Vrms | 1.7Vrms | 1.9Vrms | | Input Sensitivity @ 4 ohms | 0.9Vrms | 1.1Vrms | 1.3Vrms | 1.5Vrms | 1.7Vrms | | Voltage Gain | 40x (32 dB) | 40x (32 dB) | 40x (32 dB) | 40x (32 dB) | 40x (32 dB) | | Output Circuitry | AB | AB | 2-Step
Class H | 2-Step
Class H | 2-Step
Class H | Power Requirements
(1/8 Power Pink Noise @ 4 Ohm) | 6A | 10A | 8A | 10A | 12A | | ALL MODELS | | Distortion (SMPTE-IM) | Less than 0.01% | Distortion (Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power | .
Less than 0.01% THD
Less than 0.01% THD | | Frequency Response | 20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB | | Damping Factor | Greater than 500 | | Input Impedance | 6 k ohms unbalanced, 12 k ohms balanced | | Input Clipping | 10 Vrms (+22 dB) | | Cooling | Variable-speed fan, rear-to-front air flow | | Connectors, each channel | Output: Neutrik Speakon(TM) and touch-proof binding posts | | Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads | | Load Protection | On/off muting, DC-fault power supply shutdown | | Dimensions | 19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails) | | Gain | 40x (32 dB) | | Weight | 21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping | | All Specification Subject to Change Without Notice. |
All brands and product names are trademarked
or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without
notification. E.&O.E.
Image & Description provided by and used with permission from
Music Unlimited (InstrumentPro.com).
Page revised: Saturday, October 14, 2006.
This page is at http://trumpetgeek.com/instruments/ |
