Ortofon OMEK Elektro Kit Product code: SKU Manufacturer: OrtofonPrice: $90.00 
| | 5% discount coupon: Enter AFF01 at checkout for 5% off any purchase |
|
Ortofon OMEK Elektro Kit Many years of experience from producing disco cartridges, and a close contact to DJ's, have resulted in several lines suitable for all tonearms and all amplifiers. The Ortofon disco cartridges are available in ½ inch versions for mounting in standard headshells or in the elegant integrated Ortofon Concorde design - for direct mounting in tonearms with standard sockets. For easier cueing, the nose of all the Ortofon disco cartridges has an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent. Specifications: - Output voltage at 1000 Hz, 5cm/sec. 7,5 mV
- Channel balance at 1 kHz 1,5 dB
- Channel separation at 1 kHz 25 dB
- Channel separation at 15 kHz 15 dB
- Frequency range at - 3dB 20-22.000 Hz
- Frequency response 20-15.000 Hz +3 / -2 dB
- FIM distortion at recommended tracking force, DIN 45.542 < 1%
- Tracking ability at 315Hz at recommended tracking force 80 µm
- Compliance, dynamic, lateral 6 µm/mN
- Stylus type Spherical
- Stylus tip radius R 18 µm
- Equivalent stylus tip mass 0,6 mg
- Tracking force range 3,0-5,0 g (30-50 mN)
- Tracking force, recommended 4,0 g (40 mN)
- Tracking angle 20°
- Internal impedance, DC resistance 750 Ohm
- Internal inductance 450 mH
- Recommended load resistance 47 kOhm
- Recommended load capacitance 200-600 pF
- Cartridge colour, body/stylus White/White
- Cartridge weight 5 g
- Replacement stylus unit Elektro
All brands and product names are trademarked
or registered trademarks of their respective companies. Prices, specifications, and availability are subject to change without
notification. E.&O.E. Image & Description provided by and used with permission from
Music Unlimited (InstrumentPro.com). Page revised: Saturday, October 14, 2006.
This page is at http://trumpetgeek.com/instruments/ |